Aluminum Cap 330ml Glass Bottle Beverage Juice Filling And Sealing
Machine 4.23KW
3in1 Juice bottle filling machine
1. The raw water will be purified and sterilized after passing
through the water treatment system, and will be stored in the
purified water storage tank;
2. The juice will be prepared by the juice preparation system, the
prepared juice is stored in the insulation tank (for heat
preservation) temporarily;
3. Automatic heat resistance PET bottle blow molding machine is
connected with the water filling machine by the Air conveyor;
4. Prepared juice will be pumped into the juice filling machine; At
the same time, empty bottles pass through the rinsing, filling and
capping 3-in-1 monoblock, the bottles will be rinsed, filled and
capped.
5. Bottled water goes out from the water filling machine and will
be transferred to the bottle over-turn sterilizing machine, the cap
and the bottle mouth will be sterilized after passing through the
sterilizing machine, then the bottles will be transferred to the
bottle cooling machine;
6. The bottles are getting dried after passing through the blowing
dryer, and the dried bottle will go to the labeling machine and PE
film shrink wrapping machine;
7. The packed bottle water will come out from the PE film shrink
wrapping machine.
Technique parameter
| Model | CGF8-8-3 | CGF16-12-6 | CGF18-18-6 | CGF24-24-8 |
| Productivity | 2000BPH | 4000BPH | 6000BPH | 10000BPH |
| Rinsing Head | 8 | 16 | 18 | 24 |
| Filling Head | 8 | 12 | 18 | 24 |
| Capping Head | 3 | 6 | 6 | 8 |
| Bottle Volume | 350ml~2000ml±10ml |
| Bottle Diameter | φ50-92mm |
| Bottle Height | 150-310 mm |
| Filling Tolerance | ±2% |
| Cap Size | 28mm and 30mm PE Standard Caps |
| Air Pressure | 0.6MPa |
| Air Consumption | 500 L/min |
| Filling Water Consumption | 1.5 m3/h | 1.5 m3/h | 3 m3/h | 6 m3/h |
| Rinsing Water Consumption | 0.5 m3/h | 0.5 m3/h | 1 m3/h | 2 m3/h |
| Motor Power | 4.88kw | 5.88kW | 6.68kW | 7.68kW |
| Voltage | 380V |
| Dimension | (L*W*H) 2100*1500*2200mm | (L*W*H) 2100*1500*2200mm | (L×W×H) 2450*1800*2200mm | (L×W×H) 2750*2180*2200mm |
| Weight | 2000kg | 2500kg | 3000kg | 5300kg |
| Filling Principle | Gravity Filling |
Features
1) Using the wind sent access, with clamp hanging the bottle neck ;
which can keep the bottle shape and high-speed.
2) Washing bottle mouth with special designed washing
manipulator,clip in the bottle neck, stable and avoid secondary
pollution.
3) Filling uses lifting valve, adopts micro pressure filling
principle to ensure correct filling. 4)Capping adopts French
advanced technology, cap sorter install in a lower position, send
cap in level position.
4) Host adopts advanced PLC automatic control technology, the key
electrical components from famous company such as Japan's
Mitsubishi, France Schneider, OMRON.
You can click the below picture to see the video.
https://www.youtube.com/watch?v=6hucff2X4Nc&feature=share
