2-In-1 Monoblock PLC Control Beer Canning Line / Carbonated
Beverage Can Filling Machine
Brief introduction
1. Capacity:4000cans per hour based on 250ml aluminum can
2. Filling pressure:Isobaric pressure
3. Machine structure:Filling sealing 2-in-1 monoblock
1. The filling valves are pneumatic control, automatic lifting,
online filling volume adjustment, high automation.
2. Special care has been taken in the gasket design, both in the
shape and material, since the long service life is our aim. All the
seals are “food-grade” certified and can withstand sterilization.
The CIP cleaning solution gets in contact with every part and
interstice of the valves.
3. The filler is equipped also with a system that allows to set the
filling level in the cans thanks to mechanical operations that can
stop the bottle lifter action and consequently the penetration of
the valves into the cans.
4. The whole filling process can be set directly from the touch
panel and easily changed in case of need.
5. High filling level accuracy with extremely low tolerance.
Running smoothly with very few bad cans, liquid spilling out, beer
loss ≤0.5%.
6. “No can-no lid” electronic device
7. Driven can lifters. Double cam for raising/lowering.
8. The machine is equipped with one-way automatic centralized
lubrication.
2-in-1 monoblock
Filling Part(isobaric valve)
1) Adopted Germany tech anti-corrosion non-maintaining bearing that
can reduce the pollution of filling to the environment.
2)The pressure mechanical valve is introduced the advanced foreign
design with a fast filling speed, no hygiene corner pocket, a few
sealing parts, and precise liquid level control. The whole valve is
made of 304 stainless steel.
3)The filling system can connect a CIP circulation system to wash
the pipeline .This system can clean the liquid pipe, liquid tank
and filling valve etc. effectively.
Seaming part
1, Ingenious lid loading device to make sure no can, no lid
loading, no sealing;
2, Energy saving model, one motor can process all actions;
3, Full sealing effect make sure to be suitable for liquid packing
can;
4, The machine suitable for all kinds of cans with same diameter,
height can be adjusted easily;
5, Twice sealing tech to make well sealing effect, no leakage;
Technical parameters
| Model | DGF12-4 | DGF18-4 | DGF24-6 |
| Capacity (can/Hour) | 4000 | 6000 | 8000 |
| Suitable can size ( ml ) | 150ml-500ml φ53-φ72.9mm height 65-190mm | φ52.5-φ83.3mm height 70-133mm
|
| Can size | 200/202/206/209 |
| Heads of filling | 12 | 18 | 24 |
| Heads of sealing | 4 | 4 | 6 |
| Filling way | whole machine bottom lifting up, and Isobaric pressure filling |
| Power source specification | AC380V/50HZ |
| Power (kw) | 3 | 4 | 5.5 |
| Overall dimension(mm) | 2500x2000x2350 | 2850x1800x2200 | 3200x2100x2350 |
| Weight(kg) | 3800 | 3850 | 4200 |
