20000BPH Automatic Pet Bottle Drinking Water Filling Machine
Complete Line
Specification
1. Automatic bottle filling machine
2. 4-in-1 monoblock,it integrates bottle
sterilizing,rinsing,filling,capping in on unit.
3. It suitable for filling mineral water,pure water,drinking
water,etc.
4. It can fill pet bottle,plastic bottle,glass bottle,cans.
5. Its capacity is 20000 bottles per hour based on 500ml bottle
Description
1). The raw water will be purified and sterilized after passing
through the water treatment system, and will
be stored in the purified water storage tank;
2). The juice will be prepared by the juice preparation system, the
prepared juice is stored in the
insulation tank (for heat preservation) temporarily;
3). Automatic heat resistance PET bottle blow molding machine is
connected with the water filling
machine by the Air conveyor;
4). Bottled water goes out from the water filling machine and will
be transferred to the bottle over-turn
sterilizing machine, the cap and the bottle mouth will be
sterilized after passing through the sterilizing
machine, then the bottles will be transferred to the bottle cooling
machine;
5). The bottles are getting dried after passing through the blowing
dryer, and the dried bottle will go to the
labeling machine and PE film shrink wrapping machine;
6). The packed bottle water will come out from the PE film shrink
wrapping machine.
7). Gearbox type capping unit gives a close structure, keep oil
inside also using Egers material for
longlife. You can also adjust the capping rounds according to
different caps by adjusting gears below.
8). Host adopt advanced PLC automatic control technology, the key
electrical components from famous
company such as Japan's Mitsubishi, France Schneider, OMRON,ABB.
Technique parameters:
| Model | CGF18-18-6 | CGF24-24-8 | CGF32-32-10 | CGF40-40-12 |
| Production capacity(500ml)(b/h) | 4000-6000 | 8000-10000 | 12000-15000 | 16000-20000 |
| Filling precision | ≤±5MM(Liquid Level) |
| Polyester bottle standard(mm) |
Bottle diameter:Φ50-Φ100;Height:150-320
|
| Suitable cap shape | Plastic Screw Cap |
| Water pressure of Washing bottle(MPa) | 0.18 |
| Water consumption for Water bottle | 1600kg/h | 2500kg/h | 3500kg/h | 4500kg/h |
| Spraying position | 5 | 6 | 12 | |
| Dripping bottle position | 3 | 3.5 | 7 | |
| Gas source pressure(Mpa) | normal pressure | |
| Gas consumption(m3/mm) | 0.3 | 0.4 | 0.5 | |
| Total power(kw) | 5.03 | 6.57 | 8.63 | 9.5 |
| Total weight(kg) | 3500 | 5500 | 8000 | 9000 |
| Dimension(L*W*H)mm | 2450×1800×2200 | 2750×2180×2200 | 3500×2200×2250 | 6250*3050*2400 |
We provide this CGF40-40-40-12 Water filling line for our Congo's
customer,these pictures are
photographed by our engineers when they installed the machines in
Congo
If you want the video of it ,please kindly leave message to me,I can show
you the video of whole this water filling line
Conveyor system
Sterilizing water tank and pure water tank
Inside look
